Self Balancing Robot – V3

Same as the previous post, this is an old project that still doesn’t work properly, but will probably never have the time to fix, so I’ve decided to post the details here, in case I need to refer to them later.

Android IOIO Wii Motion Plus – Gyroscopes

First of all, the more I work with Android, the more I love it … ! It’s so cool to have both Linux and Java and everything is so open and hackable … !

Wii Motion Plus connected to the IOIO board and then to the Android phone

Quadcopter – home made

29 Mar 2011 – V2 is here !

Latest and greatest version, not that light but not too heavy either...

Quadcopter V2

Now I know it was all useless, but until 2 days ago, I still thought the only problem with my quad was the frame/motors and the huge vibrations they generated…

2 days ago, on Sunday night, I finally had the courage to face the truth : it could be my fault, it could be my code ! 🙂

Actually while looking at the http://www.multiwii.com/ site (huge thanks Alexandre, and really great stuff !!!) it occurred to me that their code should support my configuration out of the box.

To be honest, I’ve always though that it might be a problem with my code, but the only options to check this would have been:

1. buy an ardupilot or some other verified system and install it
2. modify the ardupilot or some other verified code to make it run on my configuration

None of the above options were easy and they could have introduced new problems by themselves…

But the multiwii code, looked like it should work with barely a few lines of change !!!

And indeed it WORKS ! Or at least it balances muuuuch more steadily on 1 axis !

This seems to prove that while I do have quite a lot of vibrations they don’t stop the quad from flying.

I still don’t know what the exact problem was with my code, I will have a look into the details once I manage to fly for real with the new code…

Motor vibrations

No motors running, just "natural" noise of the sensors...

This post is obviously related to my “roman-fleuve” post about my attempt at building a quadcopter… I’ve decided however to create a new post as the initial one has already become too long, and dealing with vibrations is a more general mechanical question, that applies to much more than just quadcopters.

I still don’t know why my quadcopter refuses to balance properly, and to be honest it could be anything: the frame, the motors, the ESCs, the code, literally ANYTHING !

However, I have the feeling it’s related to vibrations, and there’s only one way to find out: done with the funny part of building the quad, now enters the tedious/annoying task of setting a vibrations test bench and do some measurements…

Razor 9DOF IMU – I2C to Arduino

 

I2C bus "hijack" - glued with epoxy - one of them uses a via through whole, another is soldered on the back

This is obviously related to my endless post about the home made quadcopter…

But it’s a much more generic problem, so here I am, talking about it in a post of its own…

The default way of interacting with Sparkfun’s 9DOF Razor IMU , as per its documentation, is through its serial interface.